ESP-12 + Arduino IDE + FTDI232

ESP-12_bb

Atention: Power supply must be 3.3V!

Instructions for flashing/uploading sketches:

  1. Power on FTDI and make sure computer is detecting it
  2. Connect GPIO0 to Ground
  3. Power on power supply (3.3V)
  4. Upload sketch
  5. Power off power supply
  6. Disconnect GPIO0 from Ground
  7. Power on power supply

Note: Most of tutorials have GPIO2 HIGH. On mine it doesn’t work, must be LOW

Try with BLINK example but change PIN 13 to PIN 2 to enable the BUILTIN_LED

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s